Browse all practice questions for the Radiologic Technology (RT) Entrance Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Radiologic Technology (RT) Entrance Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • How much rotation from an AP position of the ankle is typically required to produce an AP mortise projection?
  • Which of the following is the SI unit for the rad?
  • The bluish skin coloration known as cyanosis is an indication of what condition?
  • Which of the following describes the effect of a small focal spot in radiography?
  • Which projection of the ankle best demonstrates the open joint space of the lateral aspect?
  • Which imaging modality is considered best for evaluating soft tissue injuries?
  • What is the primary focus of radiobiology in radiologic technology?
  • What does an increase in kVp primarily influence in an x-ray exposure?
  • What describes the energy of the bremsstrahlung photon?
  • Which factors are included in the three alignment factors in radiologic technology?
  • Which component of the anode assembly is placed outside the vacuum of the envelope?
  • What kind of radiation is used in a CT scan?
  • What area of the body is typically imaged using an AP projection of the thoracic spine?
  • What defines battery in legal terms?
  • Which type of filter is suitable for use with an AP foot examination?
  • Describe the benefits of using double-contrast studies.
  • What could be a consequence of inappropriately high radiation doses?
  • What is the primary purpose of using lead aprons in radiology?
  • Which interaction has a significant impact on the quality of an x-ray image?
  • Which part of the X-ray machine generates the radiation?
  • What is the effective dose limit for a radiographer over any given 13-week period?
  • Define the term "radiation therapy."
  • How much CR angulation is required for a scapular Y projection?
  • A patient has a possible bony defect of the midwing area of the scapula. What projection aside from the routine AP scapula would best demonstrate the involved area?
  • What is the dynamic range of exposure for photostimulable phosphors in terms of ratio?
  • Which factors directly affect the quality of an x-ray beam?
  • Which type of fracture is classified as a hyperflexion injury?
  • How often is it recommended for radiology equipment to undergo routine maintenance?
  • Besides increasing the source to image receptor distance, what other factor improves spatial resolution for lateral and oblique projections of the cervical spine?
  • The 15% rule changes which aspect of radiography?
  • Why is proper equipment calibration essential in radiologic technology?
  • What is the effect of changing the source-to-image distance (SID) in X-ray tube angulations?
  • What is the primary purpose of the use of grids in radiography?
  • Which imaging modality uses ionizing radiation to produce images of the body's internal structures?
  • What is the effect of the "heel effect" in an x-ray tube?
  • What effect does an increase in linear energy transfer (LET) have on relative biologic effectiveness (RBE)?
  • Which bone of the pelvic girdle forms the anterior inferior aspect?
  • Which term describes the technique of using an electronic detector in radiology?
  • To protect the radiographer during X-ray exposures, where are the mA and kVp selections typically located?
  • Why is patient history important in radiologic assessments?
  • What safety measure should technologists take when performing fluoroscopy?
  • What is an advantage of three-dimensional imaging technologies?
  • In terms of radiation safety, which device is used to prevent backscatter radiation?
  • Which of the following is a primary responsibility of a radiologic technologist?
  • What is the purpose of the grid in radiographic imaging?
  • Which ionization chamber should be used for a tangential projection of the intertubercular groove?
  • In radiology, what is the term for the dose of radiation absorbed by a patient?
  • How does a PACS system benefit a radiology department?
  • What is the main advantage of digital radiography over traditional film radiography?
  • Which scenario would constitute a violation of patient confidentiality?
  • What is the primary imaging modality used to assess soft tissue and vascular structures?
  • In radiographic imaging, the elongation of the left iliac wing and narrowing of the right iliac wing is most likely due to which positioning error?
  • During which interaction with matter does the x-ray photon convert to matter in the form of two electrons?
  • What documents should be reviewed before performing an imaging procedure?
  • What is the normal range of temperature when measured orally?
  • In the erect adult bony thorax, how much higher is the posterior portion of a typical rib compared to the anterior portion?
  • Which of the following terms describes positioning in relation to the body's midline?
  • What typically causes cracking of the anode in radiographic equipment?
  • Which of the following best describes the purpose of a compensating filter in radiography?
  • What should be done to correct a lateral projection of the sternum showing superimposed ribs?
  • High contrast in radiography is primarily related to what?
  • What are the image quality indicators in digital radiography?
  • What is the primary purpose of the informed consent process in medical procedures?
  • What is the primary role of the radiation safety officer (RSO) in a radiology department?
  • What signed document is required for experimental procedures or those that carry substantial risk?
  • In radiologic technology, what does the term "exposure" refer to?
  • How can a technologist ensure patient safety during an imaging procedure?
  • A destructive type of lesion with irregular margins and increased density could indicate what condition?
  • Which imaging modality uses high-frequency sound waves?
  • What is the primary function of ultrasound in medical imaging?
  • Which interaction with matter results in a radiograph with higher contrast?
  • What type of disease transmission can occur if a radiologic technologist does not clean equipment after an examination?
  • What does the term "synovial" refer to in joint types?
  • When an ambulatory patient presents with possible pneumonia and chest pain, what positioning routine should be performed?
  • Why is proper patient positioning essential in radiology?
  • What is the primary purpose of using filters in fluoroscopy?
  • The presence of the moire effect on an image indicates a problem with what component?
  • Which projection is used to project the dens within the shadow of the foramen magnum?
  • What is the definition of negligence?
  • What is the term for releasing medical records without a patient's consent?
  • What is the importance of maintaining an appropriate room temperature in imaging departments?
  • Why is it important to document a patient's medical history before imaging?
  • What is the greatest factor contributing to scatter radiation?
  • What is the normal pulse rate range for an adult?
  • What is defined as a threat or attempt to injure another person?
  • What safety precaution should radiologic technologists take when performing procedures on pregnant patients?
  • What occurs when the tube or the image receptor is not properly aligned?
  • What is the common effect of increased SID on image quality?
  • What indicates a possible overexposure in radiographic imaging?
  • What type of projection is typically used for visualizing the sacroiliac joints?
  • What is contrast media, and why is it used in imaging?
  • What factor most influences the number of photons reaching the image receptor?
  • What does the acronym ALARA stand for in radiation safety?
  • In general radiography, what is quantum noise a function of?
  • Which cranial bone is known to possess the zygomatic process?
  • What is the recommended KV range for digital systems during the superior-inferior tangential projection of the nasal bones?
  • What aspect makes image critique particularly challenging with current technology?
  • Which radioactive element is commonly used in nuclear medicine?
  • What radiographic feature indicates a well-composed image of a thoracic spine?
  • Where should the central ray be centered for an AP supine adult chest projection?
  • Which of the following methods can relieve strain on the abdomen for a patient suffering from abdominal pain?
  • The electron dislodged during Compton scattering is referred to as:
  • What does fluoroscopy allow radiologists to do?
  • In CT imaging, what is the term used for the thickness of the slice taken?
  • In terms of radiation exposure, which imaging technique usually requires the highest dose to the patient?
  • What should the technologist do when a patient complains of pain during a hip study?
  • What does computed tomography (CT) use to produce cross-sectional images of the body?
  • Which of the following emissions is primarily responsible for the production of scatter radiation?
  • What modification can improve visibility of the upper thoracic spine if it is overexposed in a radiograph?
  • What is the purpose of a quality control program in radiology?
  • The product of tube current and exposure time is equal to what?
  • Which position best demonstrates the left zygapophyseal joints of the thoracic spine?
  • What phenomenon occurs when an original ionizing event happens directly on a macromolecule?
  • What is the purpose of patient positioning during imaging?
  • Which topographic landmark corresponds to the L2-L3 vertebral level?
  • Why must the technologist slightly angle the CR caudad for most AP projections of the chest?
  • What is the primary purpose of radiologic technology?
  • What is a common use for Computed Tomography (CT) scans?
  • What is a radiograph that demonstrates minimal differences between density shades called?
  • What is the significance of the anode in the X-ray tube?
  • Which sinus is demonstrated through the oral cavity using a parietoacanthial transoral projection?
  • In CT imaging, what does the dose modulation feature do?
  • What is an essential skill for a radiologic technologist?
  • What is required to drive the thermionic cloud from the cathode to the anode?
  • Which basic projection of the elbow is best for demonstrating the trochlear notch in profile?
  • What type of joint movement does the ankle joint exhibit?
  • What is the significance of using lead aprons during radiological procedures?
  • What is the purpose of shielding during X-ray procedures?
  • How can the technologist minimize patient anxiety during imaging procedures?
  • The mA control is found between which two components?
  • The AP axial vertebral arch projection is best for demonstrating which structures?
  • What is the primary purpose of an x-ray beam filter?
  • What is the medical term for dizziness?
  • In order to include the diaphragm in upright positions, where should the central ray be centered for AP projections of the abdomen?
  • Why is it important for technologists to stay updated with new imaging techniques?
  • What does the term 'radiographic contrast' refer to in imaging?
  • What is the medical term for fainting?
  • What is the difference between rad and rem?
  • Which of the following is important for obtaining a good quality radiograph?
  • Which body structure is considered to be the most distal?
  • When full-wave rectification is applied to three-phase current, what type of ripple is produced?
  • What types of problems can occur due to technical factors in radiologic imaging?
  • What role does radiation safety training play in radiologic technology?
  • What role do radiologists play in patient diagnosis?
  • What does MRI stand for in the context of medical imaging?
  • Is it true that the only bony connection between the shoulder girdle and the bony thorax is the acromioclavicular joint?
  • What are the two main types of shock that can occur during imaging procedures?
  • What is the position that can replace the RAO of the sternum if the patient cannot lie prone?
  • In terms of anatomy, which of the following accurately defines the term 'distal'?
  • Which of the following are types of intentional misconduct?
  • Which type of projection is best used to assess the cervical spine's lateral view during injury evaluation?
  • In which scenario would a technologist use a portable X-ray unit?
  • How should a technologist respond to a patient with a previous allergic reaction to contrast media?
  • What is the annual effective dose limit for the general public in REM?
  • Where is a common site for contrast injection during imaging studies?
  • What is the primary purpose of a compensating filter in radiology?
  • Which technique is most effective for identifying signs of acute abdominal pain in radiographic images?
  • Image receptor contrast is expressed as what aspect of the D log E curve?
  • What is the primary function of filtration in radiography?
  • Which statistical measure is commonly used to assess average pulse rates in adults?
  • What kind of radiation is mainly used in diagnostic imaging?
  • What is the primary purpose of using a grid in radiography?
  • What is the fundamental principle of radiologic imaging based on?
  • As the Object-to-Image Distance (OID) increases while the Source-to-Image Distance (SID) remains constant, what happens to entrance skin exposure (ESE)?
  • What is the primary purpose of using protective aprons in radiologic procedures?
  • What is the primary function of the cathode in radiography?
  • What technical factor primarily affects the size of the radiation beam spread?
  • Which factor is least likely to affect image contrast in radiography?
  • What type of imaging technique is mammography?
  • What is the required CR angle for an AP axial inlet projection?
  • What is the primary responsibility of a radiologic technologist in emergency situations?
  • What type of CR angle is required for the AP semi-axial projection of the lung apices?
  • What is the purpose of the collimator in radiographic imaging?
  • Which position would provide the best view of the thoracic spine?
  • An optimal diagnostic quality radiograph is defined as one that is:
  • If there is a fire in your immediate area, what is the first thing you should do?
  • What is the purpose of the protective housing in an x-ray tube?
  • Which of the following factors is least likely to influence image resolution?
  • Which factor can cause extensive superimposition of the scaphoid and adjacent carpals in a PA scaphoid projection?
  • What does the term "radiographic density" refer to?
  • Identify one potential risk of radiation exposure to patients.
  • A patient comes to radiology with chondromalacia of the patella. What projection should be performed to best demonstrate the femoropatellar joint space?
  • What condition is characterized by the collapse of all or part of a lung, requiring an increase in manual exposure factors?
  • In a PA chest radiograph, what could improve lung inspiration if only seven ribs are visible above the diaphragm?
  • The slight depression above each eyebrow is termed the:
  • Which stage of mitosis is considered to be the most radiosensitive?
  • What is the anatomical classification of the first carpometacarpal joint?
  • What body habitus typically requires adjustments in radiographic technique due to size?
  • How does beam filtration affect patient dose?
  • Which of the following is NOT a structure of the proximal femur?
  • Name one common contraindication for using MRI.
  • A patient presents with a possible hemothorax in the right lung and can sit erect. What projection routine would best demonstrate this condition?
  • Which abdominal region contains the right colic (hepatic) flexure?
  • Why is it important to verify a patient's identity before a procedure?
  • What is the minimum total filtration for fluoroscopic equipment in aluminum equivalent?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy